FEATURES

• The hydrant water intake nozzles are positioned above ground level.

• The products are designed and manufactured in accordance with the EN 14384 standard.

• It offers the ability to quickly and conveniently put into operation.

• The hydrant valve is opened and closed by turning the control lever located at the top clockwise using the hydrant key.

• It can be manufactured in different L sizes and various length options depending on the need.

• After use, any water remaining in the hydrant is automatically drained via a check valve.

• To prevent freezing, hydrants should be kept closed in cold weather conditions. This allows the water inside to be drained using the valves.

• During installation, care should be taken to position the drain valves so that water can drain freely.

• The body material is spheroidal graphite cast iron, while the control shaft is made of stainless steel.

• For ease of maintenance and repair, installation is recommended with filling using materials such as gravel.

• All body and cover plate parts are protected with a powder epoxy coating applied using the fusion method.

• Before installation, the pipe line should be cleaned with pressurized water or air; additionally, a dirt trap should be installed on the water inlet line.

• There are two water intake ports on the hydrant, and their covers are made of aluminum.

• During the opening process, it is recommended to remove one of the aluminum caps to release the air that has accumulated inside.

APPLICATION AREAS

• Fire suppression systems and infrastructure lines