FEATURES

• The inner and outer surfaces are coated with electrostatic powder paint with a minimum thickness of 250 microns.

• The valve body and flaps are designed to exhibit minimum resistance.

• Sealing is provided by a T-section sealing ring secured circumferentially by a pressure ring at the edge of the seal.

• Since the seal ring presses against the conically machined body seat when the valve is closed, a perfect seal is ensured in both directions.

• Can be manufactured with an actuator upon request.

• Since the seal ring presses against the conically machined body seat when the valve is closed, a perfect seal is ensured in both directions.

• The seal ring can be easily replaced without having to remove the valve.

• The seat surface is made of hard chrome or AISI 316 stainless steel weld filler, making it resistant to wear and corrosion.

• The valve features a two-piece shaft design that increases the flow cross-section.

• The O-ring system installed on self-lubricating bushings made of bronze and delrin ensures that valves have a longer service life without requiring maintenance.

• It has a WRAS drinking water approval certificate.

APPLICATION AREAS

• Drinking water and utility water transmission and distribution pipelines

• Water treatment and wastewater treatment plants

• Pump stations and booster lines

• Agricultural irrigation systems

• Fire suppression systems and infrastructure lines

• Cooling water pipe systems in power plants

• Process and auxiliary fluid lines in industrial plants